LS512A Optical Path Converter | Optical Converter

1.needn't to change the optical fiber and detector between the two integrating spheres 2.meet IEC stabdards

LS512A Optical Path Converter | Optical Converter specification:

There are many LED manufactories using two integrating spheres and one spectrophotometer to do test. The previous testing way is: when you use big sphere to test, the customer need to connect the detector cable and optical fiber from the Spectrophotometer to the big sphere, after the calibrating and then you can do the test. When you use the small sphere, you need to take away the detector cable and optical fiber from the big sphere to the small sphere, then need to calibrate again…It is too troublesome to take out the detector cable and optical fiber between the big sphere and small sphere, and you need to calibrate again for every change. The frequent change will also shorten the life of the detector cable and optical fiber.In order to meet the customer’s request, Lisun developed a new product LS512A Optical Path Converter. Then you needn't to change the optical fiber and detector between the two integrating spheres but only need to switch the LS512A. Please visit our blog post: New Product: LS512A Optical Converter: http://www.lisungroup.com/blog/ls512a-optical-path-converter/ for more detailed photos and the usage.

Products of this category:

LPCE-2: LED Testing System includes spectroradiometer, integrating sphere, etc. It's for individual LED test and LED lamp test.LS512A: Optical Path Converter is used for those who test lighting products with two integrating spheres and one spectrophotometer. M9811: M98 series DC electronic load is designed for the LED driver application. It is with high-performance chips, high speed, high accuracy and with resolution of 0.1 mV and 0.01 mA.WT2080: This LED driver testing system meets GB/T 24825-2009, IEC62384:2006 and other national and international test standard of LED electrical property. FL860: LED Luminous Intensity Distribution Tester is a precise electronic instrument for measuring led luminous intensity. It's strictly designed according to LED standard requirements of CIE1997-127. LS280: Multiplex Luminous Flux Maintenance Meter. It's used to measure flux maintenance factor for high power LEDs or illuminants. LS822: Aging and Light Attenuation Measurement. It can save all the data after sample interval preset, can output them via RS-232 interface after work finished. LS600: High Power LED Aging Test Instrument. Designed to measure the aging-life of 64pcs power LED products simultaneously and separately, such as 1W, 3W, 5W LED. LS6100: LED Life Tester. Designed to measure the aging-life and color comparisons of 50pcs 5050 SMD LED and 100pcs 3528 SMD LED. T3: LED Thermal and Electrical Performance Analyzer. Measures Junction temperature, LED voltage K factor measurement, Forward voltage, Forward current, etc. JDS200: LED thermal and spectroradiometer  test system for LED. Measuring parameters: LED junction temperature, LED thermal resistance, etc. 

LS512A Optical Path Converter | Optical Converter